Main menu:
MIG / MAG
Pulse welding machine for 20A 3-phase supply
MEGAPULS 300
Arguably the easiest to use Pulse machine available today!
Key Options
Air or Water Cooled Versions
Single or Twin Wire Feed Units
Rehm Push Pull Universal PCB System
1.4m, 5.0m, 10.0m and 15m Interconnection Harnesses
Solid, Cored or Soft Wire set up
Power Output
10 to 300 Amps air cooled machine
300 Amps @ 80% Duty Cycle
270 Amps @ 100% Duty Cycle
Welding Processes
Mig/Mag Conventional Welding
Mig/Mag Single Pulse Welding
Mig/Mag Double Pulse Welding
Mig Brazing
MMA Electrode Welding
Programs
64 JOB programmes for conventional, Single and Double pulsed operation
4 quick-access programs available on torch
Programmes for Fe / CrNi / AlMg / AlSi / CuSi3 / CuAl8
manual welding programs
CaseWork
Industrial HD case-work with Separate Wire Feed Unit
Takes Industry Standard D300mm Reels
Integral HD Cylinder Carrier and UnderGear
Part Number |
MEGAPULS 300 - Pulsed MIG - Separate Feeder |
Information |
RM.0130-6007 |
MIG Welding Machine 10-300A - MEGAPULS 300-L |
[image:image-1] |
RM.0130-6005 |
MIG Welding Machine 10-300A - MEGAPULS 300-W |
[image:image-4] |
RM.0130-6009 |
MIG Welding Machine 10-300A - MEGAPULS 300-W-DF |
[image:image-5] |
Arguably the easiest to use Pulse MIG machine available today!
MEGAPULS 300 to 500
Wide range of uses from MIG/MAG single and double pulsed arc welding, MIG/MAG conventional welding, MIG brazing to MMA stick electrode welding for all standard materials, such as non-alloyed and alloyed steels, special steels, aluminium and galvanized sheet steel.
Maximum economic efficiency can be achieved thanks to practically spatter-free welding.
Perfect welding results thanks to:
Super-fast reacting, precise, digital arc length control
Controlled droplet transfer
Maximum reproducibility and setting precision of the digital current source
Automatic ignition, welding and crater filling programs for every material
Memory for up to 63 application-specific settings
The right synergy characteristic for every material
Automatic correction possibility for all voltage-dependent values of the synergy/welding characteristics when different intermediate hose bundle lengths are used (1.4m, 5m, 10m and 15m)
Very simple operation thanks to:
Single-button control , with the welding energy as leading variable,
Synergy control providing the welding process with optimum values at all times